Generation of finite subgroups of the mapping class group of genus 2 surface by Dehn twists

In this note we give presentations, up to conjugacy, of all finite subgroups of the mapping class group of a closed surface of genus 2, using the Humphries generators. An application to homology representations is given.     

有耗介质层上多导体传输线的电磁耦合时域分析方法

目前,针对空间电磁场作用有耗介质层上传输线的电磁耦合,仍缺乏有效的数值分析方法.因此,本文提出一种高效的时域混合算法,很好地解决了有耗介质层上传输线电磁耦合建模难的问题.首先,对经典传输线方程进行改进,推导了适用于有耗介质层上多导体传输线电磁耦合分析的修正传输线方程.然后,结合时域有限差分方法和相应插值技术,求解修正传输线方程,获得多导线及其端接负载上的电压和电流响应,并实现空间电磁场辐射与多导线瞬态响应的同步计算.最后,通过相应计算实例的数值模拟,与CST软件的仿真结果进行对比,验证了时域混合算法的正确性和高效性.     

乙基苯胺的转动光谱及分子结构

本文使用傅里叶变换微波谱仪研究了乙基苯胺类物质(邻乙基苯胺，间乙基苯胺，对乙基苯胺)的分子结构. 由于此类分子含氮原子(I¹⁴N=1)，因此跃迁谱线中都呈现出核四级裂分. 通过比较实验测定得到的分子结构，可总结苯胺环上不同位置乙基的取代对氨基及分子整体结构的影响.     

Characterization of Lignin Compounds at the Molecular Level: Mass Spectrometry Analysis and Raw Data Processing

Lignin is the second most abundant natural biopolymer, which is a potential alternative to conventional fossil fuels. It is also a promising material for the recovery of valuable chemicals such as aromatic compounds as well as an important biomarker for terrestrial organic matter. Lignin is currently produced in large quantities as a by-product of chemical pulping and cellulosic ethanol processes. Consequently, analytical methods are required to assess the content of valuable chemicals contained in these complex lignin wastes. This review is devoted to the application of mass spectrometry, including data analysis strategies, for the elemental and structural elucidation of lignin products. We describe and critically evaluate how these methods have contributed to progress and trends in the utilization of lignin in chemical synthesis, materials, energy, and geochemistry.     

Multiplasmid DNA in agarose gel electrophoresis: Suitable dye and temperature is essential for prominent profiles

Nucleic acids dye Goldview is widely used in agarose gel electrophoresis (AGE). However, in this study, a sample of multiplasmid DNA (multi-pDNA) stained with Goldview analyzed by AGE showed its instability at low temperature. Three types of DNA samples were analyzed, including linear DNA (ladder), single-plasmid DNA (single-pDNA), and multi-pDNA, electrophoretic conditions were optimized by adjusting the dye, the buffer, and the temperature (1–50°C). The results showed that the light intensity of Gelred is 2.2-times higher than that of Goldview in staining multi-pDNA. Compared with the single-pDNA and the linear DNA, the multi-pDNA stained with Goldview was greatly affected by temperature. This short communication indicated that Gelred is a highly applicable dye for analyzing multiplasmid samples. The degree and the way of binding of Goldview to multi-pDNA are greatly affected by temperature.     

An In Situ Investigation of the Protein Corona Formation Kinetics of Single Nanomedicine Carriers by Self-Regulated Electrochemiluminescence Microscopy

Protein coronas are present extensively at the bio-nano interface due to the natural adsorption of proteins onto nanomaterials in biological fluids. Aside from the robust property of nanoparticles, the dynamics of the protein corona shell largely define their chemical identity by altering interface properties. However, the soft coronas are normally complex and rapidly changing. To real-time monitor the entire formation, we report here a self-regulated electrochemiluminescence (ECL) microscopy based on the interaction of the Ru(bpy)₃³⁺ with the nanoparticle surface. Thus, the heterogeneity of the protein corona is in situ observed in single nanoparticle “cores” before and after loading drugs in nanomedicine carriers. The label-free, optical stable and dynamic ECL microscopy minimize misinterpretations caused by the variation of nanoparticle size and polydispersity. Accordingly, the synergetic actions of proteins and nanoparticles properties are uncovered by chemically engineered protein corona. After comparing the protein corona formation kinetics in different complex systems and different nanomedicine carriers, the universality and accuracy of this technique were well demonstrated via the protein corona formation kinetics curves regulated by competitive adsorption of Ru(bpy)₃³⁺ and multiple proteins on surface of various carriers. The work is of great significance for studying bio-nano interface in drug delivery and targeted cancer treatment.     

Accurate Geometry and Non-Covalent Interactions in 1-Phenylethanol and its Monohydrate: A Rotational Study

The pure rotational spectra of 1-phenylethanol and its monohydrate were measured by using a pulsed jet Fourier transform microwave spectrometer. One conformer of the 1-phenylethanol monomer with the trans form was observed in the pulsed jet. The experimental values of rotational constants of ten isotopologues, including eight mono-substituted ¹³C and one D isotopologues, allow an accurate structure determination of the skeleton of 1-phenylethanol. For its monohydrate, only one isomer has been observed, of which 1-phenylethanol adopts the trans form and binds with water through an O−H⋅⋅⋅O_w and an O_w−H⋅⋅⋅π hydrogen bond. Each rotational transition displays a doublet with a relative intensity ratio of 1 : 3, due to a hindered internal rotation of water around its C₂ axis. This study provides the information on accurate geometry of 1-phenylethanol (PE) and large amplitude motion of water in the PE monohydrate.     

From Polymer to Monomer: Cleavage and Rearrangement of Si‐O‐Si Bonds after Oxidation Yielded an Ordered Cyclic Crystallized Structure

Polymerization reactions are very common in the chemical industry, however, the reaction in which monomers are obtained from polymers is rarely invesitgated. This work reveals for the first time that oxone can break the Si‐O‐Si bond and induce further rearrangement to yield an ordered cyclic structure. The oxidation of P1 , which is obtained by reaction of 2,2′‐1,2‐ethanediylbis(oxy)bis(ethanethiol) (DBOET) with 1,3‐divinyl‐1,1,3,3‐tetramethyldisiloxane (MM^Vi), with oxone yielded cyclic crystallized sulfone–siloxane dimer ( P1‐ox ) after unexpected cleavage and rearrangement of the Si‐O‐Si bond.     

退火处理提高P3HT:PCBM聚合物太阳能电池光伏性能

利用旋转涂膜方法制备了以P3HT:PCBM为有源层的聚合物太阳能电池, 器件结构为ITO/PEDOT:PSS/P3HT:PCBM/Al(氧化铟锡导电玻璃/聚二氧乙基噻吩:聚对苯乙烯磺酸/聚三已基噻酚:富勒烯衍生物/铝),研究了退火温度对聚合物太阳能电池性能的影响. 实验发现: 聚合物薄膜经过120 °C退火10 min处理后, 开路电压(V_oc)达到0.64 V, 短路电流密度(J_sc)为10.25 mA·cm^-2, 填充因子(FF) 38.1%, 光电转换效率(PCE)达到2.00%. 为了讨论其内在机制, 对不同退火条件下聚合物薄膜进行了各种表征. 从紫外-可见吸收光谱中发现, 退火处理使P3HT在可见光范围内吸收加强且吸收峰展宽, 特别是在560和610 nm处的吸收强度明显增大; X射线衍射(XRD)结果表明, 120 °C退火后P3HT在(100)晶面上的衍射强度是未退火薄膜的2.8倍, 有利于光生载流子的输运; 原子力显微镜(AFM)研究结果表明, 退火显著增大了P3HT与PCBM的相分离程度, 提高了激子解离的几率; 傅里叶变换红外(FTIR)光谱验证了退火并没有引起聚合物材料物性的变化.     

Study on the interaction mechanism between aromatic amino acids and quercetin

In this paper, we selected quercetin and aromatic amino acids (tryptophan, tyrosine, phenylalanine) as the research objects to investigate the change rules in the reaction process. The thermodynamic functions (Ka, ΔG, and ΔS) of the interactions between quercetin and aromatic amino acids (tryptophan, tyrosine, phenylalanine) were measured by isothermal titration calorimetry. The values of binding constant (Ka) reached maximum at 25°C; the entropies and Gibbs free energies were both negative at different temperatures. The kinetic parameters of quercetin and amino acids in the interaction process was determined by microcalorimetry. The results inferred that the driving force of the reaction was hydrogen bond or van der Waals force.